How to Install a Buzzer Holder to the Kiosk

This article explains how to install a buzzer holder on your Kayana self-service kiosk for efficient order collection.

Equipment Required

To complete the installation, you'll need:

• Buzzer holder
• Two screws (included with the holder)
• Screwdriver (not included)

Installation Steps

1. Attach the buzzer holder
   Secure the buzzer holder to the right side of the kiosk using the two provided screws and a screwdriver.
2. Thread the charging cable
   Insert the charging cable through the hole at the bottom of the buzzer holder and plug it into the charging stand.
3. Mount the charging stand
   Place the charging stand at the base of the buzzer holder where the cable has been threaded.
4. Set up the buzzers
   Put the buzzers onto the charging stand and ensure the stand is connected to power so they stay charged.
5. Power the system
   Connect the power cable to the back of the keyboard and plug it into a wall socket. Once powered, the screen will display a number.
6. Reset the display
   Press the “X” button to reset the screen to “0”. The buzzer system is now ready for use.

By following these steps, your buzzer system will be fully installed and operational, helping streamline customer order pickup at the kiosk.